Hydraulic Testers: Type PPC-04-plus / PPC-04-plus-CAN
The Hydraulic Testers are available in two versions. The PPC-04-plus, analogue version, comes with two inputs for connecting up to two analogue sensors at the same time. The PPC-04-plus-CAN comes with an CAN interface for connecting up to three digital sensors at the same time. Both versions provide automatic sensor recognition, thus making the tedious and often time-consuming parameterization of sensors redundant. The units can be easily operated via the keyboard and the individual device configurations can be viewed and managed.
-
Specifications
- - collapse all
TECHNICAL DATA
Series and Type Hydraulic Tester - Version Analog version CAN version - Maximum CAN Bus Length 50 m / 164 ft CAN version only Materials Housing made of ABS in a rubber protective - Dimensions and Weight W x H x D: 96x 172x 54mm / 3.78x 6.77x 2.13in - Weight: ca. 540 g / 1.19 lbs - Permissible Temperatures 0°C ... +50°C / +32°F ... +122°F - -25°C ... +60°C / -13°F ... +140°F - < 80% - CE Certified - Calibration Options Without calibration certificate Calibration certificate is only available for the analog Hydraulic Tester PPC-04-plus With calibration certificate - MEASUREMENTS / DISPLAY
Pressure in bar, PSI, mbar, kPa, Mpa - Temperature in °C und °F - Volume Flow in l/min and GPM - Rotational Speed in 1/min and RPM - Display FSTN-LCD, graphic, LED backlit - Visible Area 62 x 62 mm / 2.44 x 2.44 in - Resolution 130 x 130 Pixel - ELECTRICAL
Power Supply External: Micro USB socket, type B +5V DC, max. 1000 mA - Battery: Lithium Ion pack 3.7 V DC / 2250 mAh or 3.7 V DC / 4500 mAh CAN version Operating time with the rechargeable battery: approximately 8 hours - Sensor Inputs Push-in connection: 5-pol, push-pull or 5-pol., M12x1, SPEEDCON, connector (CAN version) - Automatic sensor recognition With CAN interface, maximum three digital sensors can be connected at the same time - Maximum two analog sensors can be connected at the same time Sampling Rate: 1 ms - Accuracy: < ±0.2% Full Scale ±1 Digit - Interfaces USB Device "Online transmission between unit and PC via PPC-Soft-plus (software) Measured value transmission: ACT/MIN/MAX, min. 5 ms USB standard: 2.0, full speed Push-in connection: Micro USB socket, shielded, type A" USB Host "Connection for USB stick, max. 4 GB USB standard: 2.0, full speed, max. 100 mA Push-on connection: Micro USB socket, shielded, type B" Protection Rating IP54 Dust protected and protected against splashing water CAN Version: IP67 "Dust tight and protected against splashing water" Software A PC set, consisting of a USB connection lead, length 1 m / 3.28 ft and the corresponding PC software, is included in the scope of delivery. Integrated data memory for 15,000 data records The measured data and curves can be easily transferred and processed by using PPC-Soft-plus software as well as exported to Microsoft Excel®. External storage by using a USB memory stick (1 GB included) -
Resources
Can't find what you are looking for or need more information? Contact us
-
Request Information
