HPR-02 Self Regulating Pump
The self-regulating HPR-02 is a high perssure axial piston pump in a swash plate designed for open loop systems. With both clockwise and counter clockwise rotation, it is self priming at high nominal speeds. It can reach a higher rotating speed by tank pressurization or swash angle reduction. It is a good fit for application in which noise is a concern, with an adaptive noise optimization SPU silencer. Decompression fluid is drained via pump housing for suction side stability. With exact and rugged load sensing controls, the HPR-02 pump is a good fit for tough environments and applications.
The HPR-02 pump has a special “flow on demand” control to increase energy saving. It has a compact design, while still maintaining high power density, reliability, pressuring rating, and a long working life. This pump is based on a modular system, enabling GSGR to configure it according to your requirements.
-
Specifications
- - collapse all
Technical Data
Rated Sizes 55 165D Max. Displacement 55 c/rev 331.2 cc/rev Max. Speed 2700 rpm 2100 rpm Max. Oil Flow 148.5 l/min 695.5 l/min Nominal Pressure 380 bar 420 bar Max. Pressure 420 bar 500 bar Perm. Housing Pressure 2.5 bar - Max. Input Torque 368 Nm 1964 Nm Corner Power 104 kW 431.8 kW Permissible Shaft Loads Axial: 2000 N Radial: on request Permissible Housing Temperature 90° C - Weights (without oil) 39 kg 177 kg Response Times See Datasheet - Filtration
For reliable proper function and long service life 18/16/13 Minimum Requirements 20/18/15 International Standard Code Number & Corresponding Purity Class 18/16/13 8A/7B/7C 20/18/15 9A/8B/8C Operational Parameters: Pressure Fluids
Permitted Pressure Fluids Mineral oil HLP to DIN 51524-2 Biodegradable fluids in accordance with ISO 15380 Pressure Fluid Temp. Range -20° C to +90° C Working Viscosity Range 10 mm^2/s to 80 mm^2/s - Optimum Working Viscosity 15 mm^2/s to 30 mm^2/s - Max. Viscosity (short time start up) 1000 mm^2/s - Configurable Modular System Features
Rated Size - - Direction of Rotation - - Pump Controller - - Solenoid Connector Type - - Solenoid Operating Voltage - - Noise Reduction SPU - - Drive Shaft - - PTO Through-Drive - - PTO Attachment - - Gear Pumps - - Gear Pumps PTO - - Pump Setting (ie: Speed, LS-Setting, Power-Limitation, etc) - - Pressure Cut-Off Remote Control - - -
Resources
Can't find what you are looking for or need more information? Contact us
-
Request Information
