Input/Output Modules (I/O)
Functionality & Performance that is Adaptable & Intelligent.
GS Global Resources (GSGR) I/O controllers vary in capacity and functionality, making it easy to integrate into your application. They can expand the capabilities of your vehicle control system with a wide range of programmable, CAN based I/O Expansion Modules. GSGRs modules are compliant with CAN/J1939, CAN-Open, and ISO 11783. Our input/output modules can be easily integrated with our switch panels to provide and easier and safer application.
Can’t find what you are looking for? Contact us today to discuss your questions or application needs with our design team.
-
-
-
CAN RC-FLEC Series
Flexible Electrical Center Configurable Power Distribution Module Designed for main primary power distribution, the RC FLEC (Flexible Electrical Center) centralizes power distribution, protection and control in a compact, sealed easy to install unit. The RC FLEC can be application configured providing a total system drop in solution. Integral Printed Circuit Board (PCB) allows for active […]
-
-
-
-
GSGR XIO2 Cinch Small Enclosure Module
24 Inputs, 8 Outputs, J1939 I-O Expansion Module. The GS Global Resources’ XIO2 Cinch SE (small enclosure) is a printed circuit board CAN-bus I/O module for applications that require multiple analog and digital inputs, as well as digital outputs. This module is designed to be a node on a CAN-bus, operating at 250 kbps with […]
-
-
-
-
GSGR XIO2 Hourglass Module
24 Inputs, 8 Outputs, J1939 Input/Output, Hourglass Expansion Module. The GS Global Resources’ XIO2 Hourglass I/O expansion module is a printed circuit board CAN-bus I/O module for applications that require multiple analog and digital inputs, as well as digital outputs. The module is designed to be a node on a CAN-bus, operating at 250 kbps […]
-
-
-
-
GSGR XIO3 Sealed Module
10 Inputs, 6 Outputs, I-O Expansion or Control Module, Sealed. The GS Global Resources XIO3 is a controller board which can be used as a cost-effective expansion board for an existing control system using J1939 CAN Network. The XIO3 can also be utilized as a stand-alone controller for a specific application allowing for a solution […]
-
-
-
-
IQAN-MC41 Module
Best for Smaller Applications, 18 Inputs, 8 Outputs, Task-Oriented Control Implementing Single Features For Mobile Hydraulic Systems and Vehicles. The IQAN-MC4x is a family of master controllers. This is a high-performance master controller for cost-efficient task oriented control, the 3 available sizes may be used in different ways. MC41 for cost-efficient task oriented control MC42 […]
-
-
-
-
IQAN-MC42 Module
For Mid-Size Applications, 18 Inputs, 16, Outputs, Task-Oriented Control, Implementing Single Features for Mobile Hydraulic Systems, and Vehicles. This is a high-performance master controller for cost-efficient task oriented control, the 3 available sizes may be used in different ways. MC41 for cost-efficient task oriented control MC42 mid-size applications and I/O distribution MC43 large space-saving centralized control The IQAN-MC42 controller […]
-
-
-
-
IQAN-MC43 Module
For Larger Applications, 18 Inputs, 50 Outputs, Total Vehicle Control (All Hydraulic Functions). High-Performance Master Controller for Cost-Efficient Task Oriented Control. The IQAN-MC4x is a family of master controllers. The three sizes may be used in different ways. MC41 for cost-efficient task oriented control MC42 mid-size applications and I/O distribution MC43 large space-saving centralized control […]
-
-
-
-
IQAN-XC21 Module
Stackable, Flexible Expansion I/O Module. The IQAN-XC21 is an IQANdesign platform stackable, flexible expansion B32module in the IQAN product group. This unit is a small dimension I/O module to be used as an expansion unit in an IQAN system. It is also useful as an interface with the IQAN-LC6-X05 joystick to provide CAN capability. The […]
-
-
-
-
IQAN-XA2 Module
8 (20) Inputs, 12 Outputs IQAN design Expansion Module. The IQAN-XA2 is an IQAN design Platform expansion module that is designed for high-performance PWM valve drive control, weather resistance, and safety. All IQAN expansion modules communicate with a master over a CAN-bus, using the IQAN CAN Protocol (ICP). The IQAN-XA2 has increased flexibility that allows […]
-
-
-
-
IQAN-XC10 Module
30 Inputs, 20 Outputs, IQANdesign Input Output Module. The IQAN-XC10 is an IQANdesign Platform expansion module that is designed to get a high digital I/O count in one module. All IQAN expansion modules communicate with a master over CAN-bus, using the IQAN CAN Protocol (ICP). The IQAN-XC10 is a compatible variant of the VMM3120 and is […]
-
-
-
-
CM0410 Module
J1939 Slave Controller Module, J1939 Protocol Over A CAN-Bus Connection, 4 Inputs, 10 Outputs. The CM0410 controller module is a compact J1939 slave unit that features configurable I/O using a supplied PC tool. The main function of the CM0410 module is to provide a means of controlling mechanical relays or low current loads via messages […]
-
-
-
-
CM0711 Module
Semi-Custom Controller Module (master unit), CAN, Powertrain Control (power shift transmissions), Implementing Single Features On A Vehicle (like auxiliary hydraulics control), 7 Inputs, 11 Outputs. The CM0711 controller module (Electronic Control Systems) is a rugged controller that can be used alone or with other controllers in a system. The CM0711 is programmed in C by […]
-
-
-
-
CM2115 Module
Semi-Custom Controller Module (master unit), Software C and SDK, 1xCAN (J1939), Master Controller with 21 Inputs, 15 Outputs. The CM2115 is a rugged unit that is perfect when used alone or with other controllers in a system. The CM2115 is programmed with C by customers to meet their needs. It communicates using the J1939 protocol […]
-
-
-
-
CM3626 Module
Semi-Custom Controller Module (master unit), I/O Controller, Program C, 2xCAN (J1939), 36 Inputs, 26 Outputs. The CM3626 is a general purpose input/output controller that can be used to monitor system sensors and drive system loads. It can be used in any systems where hydraulic control, lighting control, or general electrical control is required. The CM3626 […]
-
-
-
-
IQAN-XC22/23 Module
Small Dimension I/O Module Designed for Outdoor Use on Mobile Machinery. The IQAN-XC22 and IQAN-XC23 are IQANdesign platform expansion modules in the IQAN system, designed for outdoor use on mobile machinery. This type of unit is a small dimension I/O module to be used as an expansion unit in an IQAN control system. All IQAN […]
-
-
-
-
IQAN-XS2 Module
8 (20) Inputs, 12 Outputs, IQANdesign Expansion I/O Module. The IQAN-XS2 is an IQANdesign Platform expansion module designed for high digital I/O count, weather resistance, and safety. The IQAN expansion modules communication with a master over CAN-bus, using the IQAN CAN Protocol (ICP). The IQAN-XS2 has a large number of inputs and outputs that allow […]
-
-
-
-
VMM0604 Module
Stand-alone Controller CAN/J1939 Multiplexing Module, General Purpose for Vehicle & Other Applications With Steady Voltage Of Less Than or Equal to 32Vdc, 6 Inputs, 4 Outputs. The VMM0604 is a rugged CAN controller unit that is a perfect controller for mobile equipment when used alone or with other VMM modules in a control system. The VMM0604 communicates using the J1939 protocol […]
-
-
-
-
VMM1210 Module
Stand-alone Controller CAN/J1939 Multiplexing Module, High-Power Outputs, 12 Inputs, 10 Outputs. The VMM1210 module is a controller that can be used alone or with other VMM modules in a control system. The VMM1210 module communicates using the J1939 protocol over a CAN- bus connection. The controller’s inputs measure analog, digital and frequency signals and outputs suited […]
-
-
-
-
VMM1615 Module
Stand-alone Controller CAN/J1939 Multiplexing Module, Rugged, High-Power For Heavy Loads, Outputs, 16 Inputs, 15 Outputs. The VMM1615 module is a controller that can be used alone or with other VMM modules in a control system. The VMM1615 module communicates using the J1939 protocol over a CAN- bus connection. The VMM1615 is a rugged CAN controller […]
-
-
-
-
VMM2404 Module
Multiplexing Module Controller, SAE J1455/EP455, Enhanced Diagnostics, Windows-Based Ladder Logic Programming, 24 Inputs, 4 Outputs. The VMM2404 is a rugged unit that is a perfect controller for mobile equipment when used alone or with other VMM modules in a control system. The VMM2404 communicates using the J1939 protocol over a CAN-bus connection. The VMM2404 inputs […]
-
-
-
-
VMM3120 Module
Controller CAN/J1939 Multiplexing Module, General Purpose for Vehicle & Other Applications With Steady Voltage Of Less Than or Equal to 32Vdc, 31 Inputs, 20 Outputs. The VMM3120 Multiplexing Module is a software-programmable, multiplexing, input/output controller that monitors dedicated and general-purpose inputs, and controls solid-state switch outputs. Built to meet stringent SAE J1455 environmental standards, the system […]
-
-
-
-
J1939 Powercell Module
Intelligent Wiring The J1939 powercell gives you a modular and flexible power distribution unit. It uses solid-state mosfets on each output for rugged and durable control. You can connect any J1939 input device to the powercell to control the outputs. These include switch panels, touch screens and other J1939 enabled controllers.
-
-
-
-
mVEC Module
CAN Network Oversight for High Power Circuits in Vehicle Power Distribution. The Multiplexed Vehicle Electrical Center (mVEC) offers economical CAN Network oversight for high power circuits in vehicle power distribution. Rated at 200 amps, the mVEC can be configured to provide various OEM circuit protection and switching functions, using industry standard fuses, relays, and breakers, […]
-
-
-
-
mRFRM Module
32 outputs, 14 relays, 28 Fuses, High Power, Rugged, and Flexible with J1939 CAN Configuration & Monitoring. The Multiplexed Rearfed Fuse and Relay (mRFRM) module communicates with other devices on the vehicle’s CAN bus using the SAE J1939 protocol and can be part of a multiplexing system that eliminates the need for individual connections between switches […]
-
-
-
-
RFRM Series 15400 Rear-fed Fuse & Relay Module
Transportation Products – Custom Solutions for Power Distribution Modules (PDM). Based on the industry standard 2.8mm (mini) footprint, the RFRM can accept plug-in fuses, relays, circuit breakers, resistors and diodes to meet numerous power management requirements. The RFRM is available with multiple internal bussing options, accommodating various OEM wiring requirements. Efficient […]
-
-
-
-
SCS1000-16HS-DC Power Distribution Module
The perfect entry-level solution SCS1000 – performance and logic combined in one module System size and high load currents play an important role in increasingly ingenious vehicle architecture, where space in the vehicle is limited. The SCS3000 and SCS1000 modules are extremely compact power distribution systems with integrated logic. The modules offer a wealth of […]
-
-
-
-
SCS200-RC Power Distribution Modules
More intelligent and complex systems as well as the electrification of loads currently play a decisive role in the development of on-board electrical systems. The SCS200 is the right answer to these requirements. It is an intelligent power distribution system, allowing decentralised control and monitoring of loads via the CAN bus. The design features a […]
-
-
-
-
SCS200-SC Power Distribution Module
More intelligent and complex systems as well as the electrification of loads currently play a decisive role in the development of on-board electrical systems. The SCS200 is the right answer to these requirements. It is an intelligent power distribution system, allowing decentralised control and monitoring of loads via the CAN bus. The design features a […]
-
-
-
-
SCS3000-16-V2.1 Power Distribution Modules
All-in-one module SCS3000 – performance and logic combined in one module System size and high load currents play an important role in increasingly ingenious vehicle architecture, where space in the vehicle is limited. The SCS3000 and SCS1000 modules are extremely compact power distribution systems with integrated logic. The modules offer a wealth of functions together […]
-
