SPB-4/5 (Flange Version) Plastic Filler Breather
Designed to be used as filler ports for hydraulic reservoirs, allowing the reservoir to breathe whilst protecting it from contamination found in harsh environments.
-
Specifications
- - collapse all
Characteristics
Type Plastic Filler Breather - Version Bayonet version for clamping jaw installation to a single mounting hole; Cap diameter ∅101 mm (∅3.98 in) - Bayonet version with six-hole bolt pattern for flange interfaces similar to DIN 24557, part 2; Cap diameter ∅101 mm (∅3.98 in) - Pressurization Without Pressurization Standard Option Pressurized at 0.2 bar / 3 psi - Pressurized at 0.35 bar / 5 psi - Pressurized at 0.7 bar / 10 psi - Air Filter Element (Material / Micron Rating) 10 μm Foam / PUR Standard Option 40 μm Foam / PUR - 3 μm Inorganic Glass-Fiber, pleated - 10 μm Filter Paper, pleated - Basket Option Plastic basket (105 mm / 4.13 in) - Telescopic plastic basket (max. 205 mm / max. 8.07 in) - Plastic basket with flange interface similar to DIN 24557, part 2 (95 mm / 3.74 in) - Without Basket Only available for type SPB-5 Anti-Splash Feature With Anti-Splash Feature Standard Option Without Anti-Splash Feature - Dipstick Plastic dipstick (200 mm / 7.88 in) with integrated anti-splash feature A shorter dipstick length can be achieved by simply cutting down the total length according to individual requirements. When choosing a combination of a basket and a dipstick, the dipstick has to be at least 15 mm / 0.59 in shorter than the basket. Plastic dipstick (300 mm / 11.81 in) with integrated anti-splash feature - Plastic dipstick (300 mm / 11.81 in) with integrated magnet - Without a Dipstick - Features
Purpose Clamping installation; with 3 clamping jaws and cross-drive screws - Clamping installation; with a six-hole bolt pattern - Maximum Air Flow Rate 1.00 m³/min / 35.31 cfm For SPB-4/5 Operating Temperature Rnage -40°C to +120°C / -40°F to +248°F - Materials Made of non-corrosive materials - Body and cap made of glass-fiber reinforced with Polyamide (PA) - Sealings made of NBR (Buna-N®) - Accessories/Options Plastic basket (800 μm) - Pressurization up to 0.7 / 10 psi - Air Filter Element - Anti-Splash Feature - Plastic dipstick with integrated anti-splash feature - Plastic dipstick with integrated magnet - -
Resources
Can't find what you are looking for or need more information? Contact us
-
Request Information
