G101/G102 Series Pump
Fixed Cast Iron Gear Pump, Integrated Relief Valve, and Load Hold Valve, 5,1-6,4. Displacement.
The G101/G102 fixed displacement gear pumps offer high performance and high endurance due to its cast iron construction, making it an ideal selection for the Vocational & Municipal Equipment market. It is available as a standard pump with an integrated valve for raising and lower dump beds, with integral relief valve.
Underbody Hoist to Big Trailers –
The dump body pump/valve products deliver the right flow range for most applications at 1800 rpm/2000 psi. Models with two shafts (C101/G101) can be mounted to remote PTO’s operating in either direction of rotation. Single shaft units (C102/G102) mount directly to the vehicle drive train. All can be connected in two- or three-line circuits to control single-acting cylinders. All units are supplied with factory-set 2000 psi relief valves.
• 9.5, 21 & 29 gpm @ 1800 rpm
• Pressures to 2500 psi
• Speeds to 2400 rpm
• 2- or 3-line installations
• Choice of mountings
• Air remote operators available
• Relief valve protects pump & cylinder
-
Specifications
- - collapse all
Performance Characteristics
GPM @ 1800 rpm 9.5, 21 & 29 - Pressure Up to 2500 psi - Body Material Cast iron - Case Drain Option No - Charge Pump Option No - Circuit Type Open - Configuration Single - Control Method N/A - Energy Recovery Capable No - Filtration Option No - Fluid Type Standard Hydraulic Fluid / Phosphate Ester - Maximum Displacement 64 cm³/rev 3.9 in³/rev Maximum Fluid Temperature 80º C 180º F Maximum Fluid Temperature -20º C 0º F Maximum Operating Pressure 172 bar 2500 psi Maximum Speed 2400 rpm - Min. / Max. Viscosity (SUS) 50 / 7500 - Maximum Weight 20.4 kg 45 lbs. Mounting Option SAE, DIN - Port Conenection NPT Threaded Porting Location Rear port - Pump Type Gear - Rotation Clockwise, counter clockwise, bi rotational - Shaft Type SAE - Options
Air shift valve available All dump units can be shifted from the cab by cable or by air with our Air Shift Kit. The kit consists of an air cylinder that mounts on the valve unit, a pneumatic control valve that mounts in the cab, 30' of air hose and all necessary connecions. A minimum of 80 psi air pressure is required, which can be taken off the brake system or on-board compressor. The shifter can be retro-fit easily to existing pump/valve units by following the simple instructions with each kit. Features and Benefits
Three-piece cast iron construction for distribution flexibility - Durable high-strength cast iron body for excellent power to weight ratio - Cast iron construction for durability - Balanced thrust plates minimize friction and leakage - Roller bearings for durability - Markets
Vocational & Municipal Equipment - Applications
Dump Truck - Dump Trailer - -
Resources
Can't find what you are looking for or need more information? Contact us
-
Request Information
