FAP Series Proportional Poppet Valves
The FAP Series are non-compensated proportional poppet valves. It offers repeatable and accurate operation throughout the full control range of the valve. The FAP valve series excels in low flow metering conditions, where control of your equipment is most critical. Available in either normally-open or normally-closed configurations, they’re capable of flows up to 117 lpm (31 gpm) and pressures as high as 210 bar (3000 psi).
-
Specifications
- - collapse all
Mechanical
Configuration Normally Open Normally Closed Flow Direction Side to Nose (2 -1) - Power Consumption 18W - Flow Rate 7, 10.5,21.5, 28, 14.5, 26, 31 Gal/min 27,40,81.5, 106, 55, 98.5, 117 L/min Maximum Inlet Pressure Rating 210 bar - Minimum Pressure Differential 300 psi, 21 bar - Frequency 100-400 Hz - Hysteresis < 15% - Variation of Opening Point 20%-25% of Input Signal N/A Variation of Closing Point N/A 60%-65% of Input signal Leak Rate 5 @ 3000 psi (210 bar) drops/min - Cavity Size C08-2, C10-2, C12-2F, C16-2 - Valve Material All parts steel. - Seal Material D-Ring, Nitrile, Flurocarbon - Max. Kinematic Viscosity Mineral-based or synthetic with lubricating properties at viscosities of 45-2000 SSU (6 to 420 cSt) cSt - Weight .38, .42, .65 - .88, .48, .52 - .68, .9 lb, .17 - .19, .3, .4, .22 - .23, .31, .41 kg - Installation Torque 20, 25,55, 80-85 lb-ft - 30, 34, 74, 108-115 Nm - Coil Type 5/8: Super Coil Low Watt (CAS) - Filter Efficiency Rating IS 4406:1999 Code 18/16/13 Coil Nut Tightening Torque 1 lb-ft, 1.4 Nm - Environmental
Operating Temperature -50° to +270° -45° to +143° -30° to +250° -34° to +121° -15°F to +400°F -26°C to +204°C -
Resources
Can't find what you are looking for or need more information? Contact us
-
Request Information
