F10 Series Motor/Pump
Axial Piston Fixed Displacement, Bent-Axis Hydraulic Motors – Small Frame, Displacement 5-19cc, Intermittent Pressure Up To 420 bar (6090 psi), Continuous Operating Pressure Up To 350 bar (5075 psi), Speeds Up To 14000 RPM.
F10 is a bent-axis, fixed displacement motor/pump. It can be used in numerous applications in both open and closed loop circuits.
F10 Features:
- F10 is a bent-axis, fixed displacement motor/pump. It can be used in numerous applications in both open and closed loop circuits. The F10 series is available in sizes 30, 37, 56, 80, 90, 107, and 125 cc.
General F Series Features:
- The laminated piston ring offers important advantages such as unbeatable efficiency and thermal shock resistance
- High allowable speeds and operating pressures means high output power
- The unique piston locking, timing gear and bearing set-up as well as the limited number of parts add up to a very robust design with long service life and, above all, proven reliability.
- The 40° angle between shaft and cylinder barrel allows for a very compact, lightweight motor/pump.
- Small envelop size and a high power-to-weight ratio
- The motor version has highly engineered valve plates for high speed and low noise
- The pump version has highly engineered valve plates for increased self priming speed and low noise, available with left and right hand rotation.
- Our unique timing gear design synchronizes shaft and cylinder barrel, making the F10/F11/F12 very tolerant to high ‘G’ forces and torsional vibrations.
- Heavy duty roller bearings permit substantial external axial and radial shaft loads
-
Specifications
- - collapse all
Mechanical
Displacement [cm3/rev] 30.0-125.0 [cu in/rev] 1.83-7.63 Operating pressure max intermittent [bar] 350 [psi] 5075 max continuous [bar] 300 [psi] 4351 Motor operating speed [rpm] max intermittent 5400-3100 max continuous 4900-2800 min continuous 50 Max pump selfpriming speed L or R function; max [rpm] 3100-200 Max power max continuous power [kW] 62-149 Drain temperature max [°C] / [°F] 115/239 min [°C] / [°F] -40/-40 Theoretical torque at 100 bar [Nm] 47.6-241 [lbf ft] 35.1-177.8 Mass moment of inertia (x10^-3) [kg m^2] 1.7-11.2 (x10^-2) [lbft^2] 4.03-26.58 Weight [kg] 11.5-33.0 [lb] 25.35-72.75 Performance Characteristics
Body Material Cast Iron - Case Drain Option Yes - Charge Pump Option No - Circuit Type Open - Configuration Single - Control Method No - Energy Recovery Capable Yes - Filtration Option No - Fluid Type Standard hydraulic fluid - Maximum Displacement 19 (CM3/REV) 1.16 (IN3/REV) Maximum Flow 17.56 (GPM) 66,5 (LMP) Maximum Fluid Temperature 115° C 239 F Minimum Fluid Temperature -40° C -40 F Maximum Noise Level 80 dBA - Maximum Operating Pressure 420 bar 6090 PSI Maximum Radial Shaft Load 400 kg 880 lbs. Maximum Speed 4600 rpm - Maximum Viscosity 1000 cSt / 4664 SUS - Minimum Viscosity 8 cSt/ 37.3 - Maximum Weight 11 kg 24.2 lbs. Media Hydraulic - Mounting Option SAE, ISO, CETOP, Cartridge - Port Connection SAE, ISO BSPP Type - straight threaded Port Location Rear - Pump Technology Piston - Pump Type Fixed - Rotation Clockwise, counter clockwise, bi-rotational - Sensor Type Speed, rotation - Thru-Drive Capability Thru-Drive Capability - Options
CETOP, ISO, SAW and SAE versions - Power Boost A high speed F11 or F12 motor could be optimized with a Power Boost™, which means less fluid friction and oil compression. This can reduce power losses by up to 5 kW. The improved efficiency generates less heat, reducing the need for cooling and consequently improves fuel consumption. - Contact GS Global Resources for more information - Features and Benefits
Displacement from 5-19 cc – support various applications - Gear synchronization – robust and reliable - High overall efficiency – reducing greenhouse gas emissions and fuel consumption - Low noise level – meeting industry noise emissions - Low weight – reducing greenhouse gas emissions and fuel consumption - Laminated piston rings –- low internal leakage, high overall efficiency - High speed capability – suitable for a variety of applications - Operating pressures up to 420 bar - Shaft end and mounting flange meet ISO, SAE and CETOP standards - Small installation dimensions – fits wide range of applications - Tolerates low and high temperature shocks –- suitable for the most demanding environments - Markets
Industrial - Energy - Government (Non Aerospace) - HVAC - Mobile - Natural Resources - Transportation (Non Aerospace) - Applications
Agriculture Machinery - Construction Equipment - Forestry Equipment - Material Handling Equipment - Turf Equipment - Vocational & Municipal Equipment - Other Mobile - Mining - Oil & Gas - Power Generation - Defense - Marine(Non – Military) - Air Conditioning - Heating - Machine Tools - Aerial - Rail - -
Resources
Can't find what you are looking for or need more information? Contact us
-
Request Information
