MAGHEX 2 Fan Controller
Fan Controller Designed for Hydraulic and Engine Cooling Systems
This combined sensor and controller is designed to mount directly to the heat exchanger. Smart temperature-based controller for oil and coolant fan systems in mobile and industrial applications.
It provides accurate temperature control by cycling the electric cooling fan to maintain desired oil temperature. A single housing reduces wiring and mechanical installation. The MAGHEX magnetic wand is used to set up and program the sensor. Not needed for operation. LEDs indicate the oil temperature setting.
- PN 59649 -8 SAE M thread connection for heat exchanger.
- MA Series
- PN 600181 3/8” NPT thread connection for heat exchanger.
- M/MF and DH/DF Series
Features
- Easy installation and integration into any SAE #8 or 3/8″ NPT port or cavity
- Creates a simple drive circuit with minimal programming
- Low cost alternative to complex control systems
- Utilize built-in temperature sensor to activate the fan based upon current set point
- Oil temperature status shown with LED indicator
- 12 or 24 volt DC operation controlling up to 60 amps
- Temperature sensor and operation controller in single aluminum housing
- Select from 10 temperature settings from 100° to 200°F (38° to 93°C)
- Solid-state design, fully sealed microprocessor
- Manual override feature built-in
- Shuts off 7 degrees below set point
- Improved circuitry to accommodate higher amperage applications
- Housing is used as a heat sink for internal components
- Automatic low voltage shut down
-
Specifications
- - collapse all
Mechanical
Switch Type Normally Open - Set point Selections 10 set points in 10 degree increments from 100°F to 200°F (38 to 93°C) Selection Method Magnetic programming wand - Enclosure Rating IP69K - Sealed Housing High-grade automotive potting compound - Weight Approx 8 oz. (.23 kg) incl. wire - Mounting #8 SAE Thread - Fan Connector 3 Conductor receptacle - Electrical
Operating Voltage 12 or 24 VDC Systems - Min/Max Voltage 9 VDC 32 VDC Current Rating 60 AMPS - Current Draw MAGHEX 10 mA - Set point Selections Environmental
Ambient Operating Temperature -40° to +185°F (-40° to +85°C) Measurement Temperature Range 100°F to 200°F (38 to 93°C) Materials
Housing Material Anodized luminum - -
Resources
Can't find what you are looking for or need more information? Contact us
-
Request Information
