-
-
-
ATS50 Series
Sensor Condition Monitoring 0-5Vdc Non-Contact, Hall Effect, Angle Tilt – Single-Axis, IQAN Compatible, Electronic Control Systems. The ATS50 is a non-contact, Hall effect angle/tilt sensor for mobile hydraulic applications. The ATS50 will sense angular movement in one-axis and output a ratiometric 0-5Vdc signal. The measuring range is +/- 10 degrees. The sensor has twelve-inch leads with an […]
-
-
-
-
LS60 Series
Sensor Condition Monitoring Solid State, Dual Axis, Level, Tilt Sensor, for Mobile Hydraulic Applications, Electronic Control. The LS60 delivers dual-axis level sensing where it is critical to limit the amount of tilt to operate machinery safely. It can be used to supply power to functions that should be used when within normal operating conditions. The […]
-
-
-
-
ADS50 Series
Analog Lever Distance Sensor, Hall Effect, for Outdoor Applications, IQAN Compatible, Electronic Control. The Analog Lever Distance Sensors – ADS are Hall effect devices with an output voltage dependent upon the angular position of a lever arm. They utilize non-contacting technology and provide a linear output over one inch (35 degrees) of travel. The ADS […]
-
-
-
-
ACC Series
Acceleration Sensor, 1.2-3.8 Vdc Output Accelerometer or 2.103-3.132 Vdc Dual Output Accelermoter, Used to Sense Tilt and Motion, IQAN Compatible, Electronic Control Systems. The Accelerometer and Inclinometer Sensors are MEMs devices with an output voltage dependent on the amount of inertial force applied. The accelerometers and inclinometers have an inertial range up to ±1.5G. The […]
-
-
-
-
VMM3120 Module
Controller CAN/J1939 Multiplexing Module, General Purpose for Vehicle & Other Applications With Steady Voltage Of Less Than or Equal to 32Vdc, 31 Inputs, 20 Outputs. The VMM3120 Multiplexing Module is a software-programmable, multiplexing, input/output controller that monitors dedicated and general-purpose inputs, and controls solid-state switch outputs. Built to meet stringent SAE J1455 environmental standards, the system […]
-
