VMM2404 Module
Multiplexing Module Controller, SAE J1455/EP455, Enhanced Diagnostics, Windows-Based Ladder Logic Programming, 24 Inputs, 4 Outputs.
The VMM2404 is a rugged unit that is a perfect controller for mobile equipment when used alone or with other VMM modules in a control system. The VMM2404 communicates using the J1939 protocol over a CAN-bus connection.
The VMM2404 inputs CAN measure analog, digital and frequency signals, while the PWM (pulse width modulated) capable outputs are ideally suited for hydraulic valve control.
The VMM2404 is able to be the main controller in a small system or may be combined with other modules in a larger system for vehicle markets including agriculture, on-highway trucks and buses, and off-road construction equipment. Equipped with an aluminum housing and environmentally sealed connectors, this controller is designed for the outdoor environment.
The VMM2404 is programmed using VMMS, a ladder logic programming tool that allows customers to develop their own software, making the VMM2404 perfect for any application.
-
Specifications
- - collapse all
Mechanical
Controller Type Master Controller - Dimensions, Overall L 5.7" x W 10" x D 1.9" − Connection (2) Ampseal connectors 35-pin connector, 23-pin connector Used to interface with the inputs, outputs, and CAN Weight 1.2 (kg) - Electrical
Supply Voltage (Vdc) 7-32Vdc − - - Inputs 24 - Voltage inputs Up to 15 -Signal range (max) 0-32 Vdc or 0-16 Vdc -Resolution @ 5 Vdc 5 mV Frequency inputs Up to 15 -Signal range (max) 0-10000 Hz Digital inputs Up to 24 -Signal high 3.4 Vdc - VBAT -Signal low 0-1.3 Vdc - - Outputs: 4 - Digital out high 4 -Type high-side switch -Max. load 3.0 A -Max. PWM frequency 500 Hz Digital out low Up to 24 -Type 3.4 Vdc - VBAT -Max. load 3.0 A - - CAN Communication SAE J1939 1 Power Supply 12/24 - Environmental
Operating Temperature −40°C to +85°C − Storage Temperature −55°C to +125°C − Environmental Protection IP66 Built to meet stringent SAE J1455/EP455 Current (sleep mode) <4 mA - System
Diagnostic/LEDS/Display 30 red diagnostic LEDS Default fault codes includes short to ground or power , over current, and and open loads. Software VMMS Ladder Logic Can be used alone or with other multiplexing modules Features & Benefits
Monitors up to 24 inputs Analog, digital or frequency 4 high-side 2.5 A outputs - 4 low-side 2.5 A outputs - PWM (pulse width modulation) for proportional valve control - Multiplexing module is self-programming when replaced in multiple module systems - General
Model, Part Number(s) Model Numbers: Part Numbers: VMM2404 (24V) 0837001ECD VMM2404 (12V) 0873002ECD Communication
SAE J1939 1 - Markets
Construction Equipment - Transportation - Agriculture Machinery - Material Handling Equipment - Applications
Bus Kneel and Door Open Control - Fan Drive Controller - Truck Mounted Crane Control - Trucks - Buses - -
Market Applications
Forwarder and Loader
The forwarder and loader transports the timber across rough forest terrain to the processing site near the forest road. Efficient […] Read More
Mobile Straddle Crane
This mobile straddle crane handles multi-million dollar yachts, barges, and large ocean-going vessels which requires precise and carefully coordinated movements. […] Read More
Off-Road Forklift
This off-road forklift is used to support large building construction projects. The forks can be loaded with up to 11,000 […] Read More
Water Sprayer
In many remote work sites, water is a rare and expensive resource that must be conserved. Maintaining precise control over […] Read More
Concrete Pumpers Benefit from Electronic Control
Market Knowledge and Solutions GS Global Resources component and software selection for the concrete pumper industry (mobile equipment) is clearly […] Read More
-
Resources
Can't find what you are looking for or need more information? Contact us
-
Request Information
