VMM1615 Module
Stand-alone Controller CAN/J1939 Multiplexing Module, Rugged, High-Power For Heavy Loads, Outputs, 16 Inputs, 15 Outputs.
The VMM1615 module is a controller that can be used alone or with other VMM modules in a control system. The VMM1615 module communicates using the J1939 protocol over a CAN- bus connection.
The VMM1615 is a rugged CAN controller with a focus on high power outputs. The high power outputs allow the VMM1615 to control heavy loads, like lights and electric actuators in addition to hydraulic valves. It is able to be the main controller in a range of vehicle markets including agriculture, on-highway trucks and buses, and off-road construction equipment or may be combined with other modules in a large system
The VMM1615 inputs measure analog, digital and frequency signals and outputs suited for hydraulic control, lighting control, or general electrical control. Equipped with a high impact plastic housing and environmentally sealed connectors, this controller is designed for the outdoor environment.
-
Specifications
- - collapse all
Mechanical
Controller Type Master Controller - Dimensions, Overall L 6.38 x W 9.72" x D 1.79" − Connection (4) 2-pin Deutsch DT connectors Used to interface with the inputs, outputs, and Cantroller Area Network (CAN) Weight 1.2 (kg) - Electrical
Supply Voltage (Vdc) 6-32Vdc − − − Inputs 16 − Voltage inputs 8 - Signal range 0-32Vdc - Resolution @ 5Vdc signal range 5 mV Frequency inputs 1 - Signal range 0-10000 Hz - Digital inputs 6 - Signal high 3.82Vdc -VBAT - Signal low 0-1.56Vdc - - Outputs 15 - Digital out high 12 - Type High-side switch - Max load 6 @ 10 A - 4 @ 5 A - 2 @ 2.5 A - Max PWM frequency 1500 Hz - - Digital out 2 - Type Solid state relay -Max load 1 A - - CAN Communication SAE J1939 2 Environmental
Operating Temperature −40°C to +85°C − Storage Temperature −55°C to +125°C − Environmental Protection IP66 Built to meet stringent SAE J1455/EP455 System
Diagnostic/LEDS/Display 40 available diagnostic LEDS Default fault codes includes short to ground or power, over current, and and open loads Software VMMS Ladder Logic Can be used alone or with other multiplexing modules Features & Benefits
Monitors up to 16 inputs Analog, digital or frequency 6 high-side 10 A outputs - 4 high-side 5 A outputs - 2 high-side 2.5 A outputs - 1 low-side 2.5 A outputs - 2 solid state relay 1 A outputs - PWM (pulse width modulation) for proportional valve control - 2 CAN-buses - General
Model, Part Number(s) Model Number: VMM1615 Part Number: 0935021ECD Communication
SAE J1939 2 - Markets
Construction Equipment - Transportation - Agriculture Machinery - Material Handling Equipment - Forestry - Material Handling - Specialty - Applications
Bus Kneel and Door Open Control - Fan Driver Control - Truck Mounted Crane Control - -
Market Applications
Concrete Pumpers Benefit from Electronic Control
Market Knowledge and Solutions GS Global Resources component and software selection for the concrete pumper industry (mobile equipment) is clearly […] Read More
Aerial Pumper
This fire truck includes a 105′ extension boom and ladder that rotates at the base. Outriggers are deployed to stabilize […] Read More
Lift System
This material handling lift system is used in automated warehouse applications to move material from floor to floor similar to […] Read More
Mining Truck
This mining truck is used to haul tremendous loads of material across rough terrain and roads at a mine site. […] Read More
-
Resources
Can't find what you are looking for or need more information? Contact us
-
Request Information
